Mini Reservoirs This is the reservoir it will hold 100ml of oil and will last 60 hours on max flow, turn the control system down and it will last a lot longer. This part is designed to be hidden away either under the seat or anywhere on the bike as long as you can get to the lid to fill it up. The whole kit is connected to the bike by cable ties/zip ties so it’s not going to ruin your bike or take long to fit.

Made with Xara

It’s what’s on the inside that counts!

Control System This is the controller, it lets you have full control over how much oil you use, settings are from number 9 that’s about every 20 second a pump round to number 1 that’s about every 2 minutes and anywhere in between. The controller should be fitted in an accessible place either under the seat or any place where adjustment can be made if necessary, Again connected with cable ties/zip ties so fits quickly and easily.

Part NO: PT4000 (Timer) £39.47

In Line Fuse And Connection To Power This is the In Line Fuse And Connection To Power cables, This is designed to be connected directly to the battery. (Sensory Edition Only) This cable should connect to one of the plugs on the controller and then to your power source.

In Line Fuse And Connection To Power

Part NO: PT1028 (In Line Fuse Assembly) £11.35

Delivery Tube Clips Part NO: PT1051 (Clips) £1.41

Delivery Tube Clips These are clips to hold the delivery tube on to the bike, you can either use these or use cable ties/zip ties if you prefer to.

Syringe (not filled) Part NO: PT1031(Syringe) £4.25

Filling Syringe (without oil) This is a specially designed 2 part syringe that you can easyly fill the Reservoir with and take with you on long bike rides thanks to it having a capped end. To use this syringe just fill it with oil and connect it to the Filling Tube Accessory (blue tube) at the end with the black rubber ring on, pull the dip stick out of the filler tube and replace it then Gently squirt the oil into the reservoir.

All part prices Do Not include postage and packing please Enquire here for details.

Mini Pump This is the pump it will work from -10 to +50 oC without adjustment. This part is designed to be attached to the frame or hidden away anywhere on the bike. The whole kit is connected to the bike by cable ties/zip ties so it’s not going to ruin your bike or take long to fit.

Part NO: Pm1072 (Mini Resivior) £21.35

Part NO: PM1073 (Container Assembly) £55.64

Mini Parts

Do you need a Part? If so your in the right place. We supply all major and minor components and we can also fix all faults and breakages that may occur along the way. All we ask is that you let us know what has happened and how you done it, so that we can fix it and get it straight back to you as soon as we can. If you need any support with what part to Order then please get in contact with us we will be happy to hear from you.

For more information on postage or order queries please contact us.

PDOiler has over 35 years of experience in making Motorcycle chain oilers. Our PDOiler’s are Fully Automatic Electronically Pumped and are not affected by temperature they will run from -10C to +50C without adjusting.

Wick Feeder This is the Wick feeder its designed to sit just above the chain so that when the chain whips it brushes it on and doesn’t drip, therefore depositing the oil that it needs and only what it needs, so there is no over oiling where the back tyre or any other part of your bike is covered in oil. The wick should be fitted on the inside of the swing arm with a cable tie/zip tie and follow the instructions provided called Wick fitting instructions.

Part NO: PT1060 (Feeder Assembly) £10.73

Part NO: PT1052 (Supply Tube (Green) £3.54